Model No.: SV-300T
Impeller Number: Single-Stage Pump
Working Pressure: Low Pressure Pump
Influent Type of Impeller: Single Suction Pump
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Verticaljoint Surface Pump
Mounting Height: Suction Centrifugal
Open Pit Pumps: Submersible Pumps
Packaging: Wooden Crate
Productivity: 10 Sets per Month
Place of Origin: China
Supply Ability: 10 Sets per Month
Hydrocyclone Feed Duty Sump Pump
Features of SV metal lined vertical slurry pumps are as follows:
Casing- The metal pumps have a heavy walled abrasive resistant 27% chrome alloy casing.
Column and Discharge Pipe- The metal pump columns and discharge pipes are steel.
Upper Strainers- Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.
Lower Strainers- Bolt-on cast strainers on the metal pump protect the pump from oversize particles.
There are three intermediate frequency electric furnaces in our foundry shop, with a capacity of 1-ton, 2-ton and 4-ton individually. We run three production lines at the same time, one lost foam production line, and two resin sand production lines. In order to supply the best quality, every batch of castings will be tested before they are put into the furnace and after they are taken out of the furnace. Our pumps are manufactured using the most abrasion and corrosion resistant materials available, and different heat treatments are applied based on the variety of the materials. Our goal is to become a reliable partner to our customers for the supply of long life pumps and parts, and to lower the customers operating costs.
A brief introduction of the slurry pumps we offer: Froth Pump Series
Slurry Pump Series:
1. Metal Lined Slurry Pump, SH Type; 2. Rubber Lined Slurry Pump (SHR Type); 3. Hi-Pressure Slurry Pump (SBH Type);
Gravel Pump Series:
1. Hard Metal Sand Pump (SG, SHG Type); 2. WN Dredging Pump (WN Type);
Sump Pump Series:
1. Metal Vertical Slurry Pump (SV Type); 2. Rubber Vertical Slurry Pump (SVR Type);
Local Pump Series:
1. Power Plant Slurry Pump (ZBG Type); 2. Coal Washing Slurry Pump (ZJ Type);
A brief introduction of the slurry pumps we offer:
Froth Pump Series
| Model || SV-300T |
| Capacity || 288-1267m3/h |
| TDH || 6.5-33m |
| Rated Motor Power || 200Kw |
| Speed || 350-700r/min |
| Max. Efficiency || 50% |
| Standard Shaft Length || 2100mm |
Construction of Vertical Pump:
Materials of Construction:
| Part Description || Material |
| Casing || A05- High Chromium Alloy |
| Impeller || A05- High Chromium Alloy |
| Back Liner || A05- High Chromium Alloy |
| Shaft || Carbon Steel |
| Mounting Plate || Mild Steel |
| Strainers || Metal |
Projects with SV Pumps:
Orders of Vertical SV Sump Pumps :
Copyright © 2019 Shijiazhuang Minerals Equipment Co., Ltd All rights reserved.