Model No.: SH/100D (6/4D-AH)
Impeller Number: Single-Stage Pump
Working Pressure: Middle Pressure Pump
Influent Type of Impeller: Single Suction Pump
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Minerals Processing: Sand And Gravel
Packaging: Wooden Crate
Productivity: 50 Sets per Month
Place of Origin: China
Supply Ability: 50 Sets per Month
High Chrome Alloy Heavy Duty Slurry Pump used for Arasive and Sharp Solids Mixture
Brand: CNSME Model: 6/4D-AH Cerfiticate: ISO/CE Origin: China
Slurry pumps are different from normal water pumps, and they are designed for the handling of very abrasive sludge and mud.
Metal Slurry Pump is used to handle highly abrasive slurries in minerals and mining sectors. When the pH value of the slurry is from 5 to 14, it is a good choice to use hard metal material, which we call A05. Metal slurry pump is also the best sold pumps in SME company. Metal slurry pumps are also widely used in quarries and coal wahsing plants.
The primary applications for the SME SH metal slurry pumps are mill discharge, crusher slurry, sand and aggregate or any coarse solids or other severe, abrasive slurries especially in te copper, gold, iron ore, lead-zinc, coal or phosphate plants. The most dramatic savings will be in these applications, though savings will also be realized on find solids, like fine sand recovery or kaolin. The key advantage of the SH metal slurry pumps is the 10% to 30% lower power, long even wear life and less pump downtime, which results in lowe cost-per-ton pumped, along with better cyclone separation.
A brief introduction of the slurry pumps we offer:
Slurry Pump Series:
Gravel Pump Series:
1. Hard Metal Sand Pump (SG, SHG Type); 2. WN Dredging Pump (WN Type);
Sump Pump Series:
Local Pump Series:
Froth Pump Series
Sand and Aggregate
Pulp and Paper
|Type||Size||Frame||Impeller: E4147A05||Shaft Seal Type||Frame Rating(kw)||Normal Max Speed(r/min)||Max Passage Size(mm)|
|SH||100||D||5 Closed Type Metal Vans, Diameter:365mm||Gland Packing, Expeller, Mechanical Seal||60||1600||44|
1. Shaft Seal: Expeller Seal
The effect of expeller seal is by use of pressure generated by impeller and expeller. And use packings or lip seal as shut down seal. Picture shows as below:
The impeller, either elastomer, stainless steel or high-chrome material, is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.
Split outer casing halves of cast contain the wear liners and provide high operation pressure capabilities. The casing shape is generally of semi-volute or concentric, efficiencies of which are less than that of the volute type.
Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy-duty roller bearing are housed in a removable bearing cartridge.
A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals at both ends protects the shaft. A split fit allows the sleeve removed or installed quickly.
Expeller drive seal, Packing seal, Mechanical seal.
V-belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
3. Slurry pumps are made for high wearing and heavy duty applications. Our pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping application. We specialise in handling the toughest and most abrasive applications and have taken this to a new level with the SH (War-man AH) series.
4. The primary applications for the SME SH/100D(6/4D-AH) metal slurry pumps are mill discharge, crusher slurry, sand and aggregate or any coarse solids or other severe, abrasive slurries especially in te copper, gold, iron ore, lead-zinc, coal or phosphate plants.
The most dramatic savings will be in these applications, though savings will also be realized on find solids, like fine sand recovery or kaolin. The key advantage of the SH metal slurry pumps is the 10% to 30% lower power, long even wear life and less pump downtime, which results in lowe cost-per-ton pumped, along with better cyclone separation.
Material: High Chrome Alloy A05
Material Chemical Requirements, Weight%
|A05||Ultrachrome||2.92||0.98||0.54||0.8||27||≤0.8||...||0.062||...||0.051||27% Cr Erosion Resistant White Iron||58-62HRC|
Construction of SH Slurry Pumps:
|AH Slurry Pump SH Series Metal Slurry Pump Specifications|
| Pump |
| S×D |
| Allowable |
Max. Power (kw)
|Material||Clear Water Performance||Impeller||Pricing|
|Capacity Q|| Head |
| Speed |
| Max.Eff. |
| NPSH |
| No. of |
| Vane Dia. |
| Weight |
|SH/25B||1.5×1||15|| Metal |
Copyright © 2019 Shijiazhuang Minerals Equipment Co., Ltd All rights reserved.